• C95810
• C95400
• C95210
• CuAl10Fe5Ni5
• C6300

Typical Chemical Composition (C95810):

• Cu: min 79.0%
• Al: 8.5-9.5%
• Sn: max 0.1%
• Zn: max 0.5%
• Ni: 4.0-5.0%
• Pb: max 0.05%
• Fe: 3.5-4.5%
• Mn: 0.8-1.5%

Typical Mechanical Properties (C95810):

• Tensile Strength: 610 N/mm2
• Elongation: 12%
• Typical Hardness: 160 HB
• 0.2% Yield Strength: 245 N/mm2

Typical Chemical Composition (C95400):

• Cu: min 83.0%
• Al: 10.0-11.5%
• Ni: 1.0-3.0%
• Fe: 3.0-5.0%
• Mn: min 0.5%

Typical Mechanical Properties (C95400):

• Tensile Strength: 540 N/mm2
• Elongation: 15%
• Typical Hardness: 120 HB

Typical Chemical Composition (C95210):

• Cu: min 86.0%
• Al: 8.5-9.5%
• Sn: max 0.1%
• Zn: max 0.5%
• Ni: max 1.0%
• Pb: max 0.05%
• Fe: 2.5-4.0%
• Mn: max 1.0%

Typical Mechanical Properties (C95210):

• Tensile Strength: 490 N/mm2
• Elongation: 20%
• Typical Hardness: 90 HB
• 0.2% Yield Strength: 170 N/mm2

Applications:

• Exceptional corrosion resistance
• High mechanical strength and hardness
• Toughness and wear resistance
• Used for heavy duty sleeve bearings and machine tool ways
• Excellent hot working properties
• Resistance to oxidation and a low coefficient of friction
• This group of alloys combines high mechanical strength and hardness with the ability to resist corrosion by a large variety of agents.
• Corrosion resistance suitable for marine, oil and chemical uses.
• Excellent hot working properties, resistance to oxidation at elevated temperatures.
• Good wearing qualities and a low coefficient of friction are some of the features of these alloys.

Profiles Available:

• Flat Bar
• Square Bar
• Round Bar / Rod
• Pipe / Tube
• Bush / Hollow
• Sheet / Plate