Share:


NICKEL ALUMINIUM BRONZE

Specifications:
  • C95810
  • C95400
  • C95210
  • CuAl10Fe5Ni5
  • C6300

 

Typical Chemical Composition (C95810):

  • Cu: min 79.0%
  • Al: 8.5-9.5%
  • Sn: max 0.1%
  • Zn: max 0.5%
  • Ni: 4.0-5.0%
  • Pb: max 0.05%
  • Fe: 3.5-4.5%
  • Mn: 0.8-1.5%

 

Typical Mechanical Properties (C95810):

  • Tensile Strength: 610 N/mm2
  • Elongation: 12%
  • Typical Hardness: 160 HB
  • 0.2% Yield Strength: 245 N/mm2

 

Typical Chemical Composition (C95400):

  • Cu: min 83.0%
  • Al: 10.0-11.5%
  • Ni: 1.0-3.0%
  • Fe: 3.0-5.0%
  • Mn: min 0.5%

 

Typical Mechanical Properties (C95400):

  • Tensile Strength: 540 N/mm2
  • Elongation: 15%
  • Typical Hardness: 120 HB

 

Typical Chemical Composition (C95210):

  • Cu: min 86.0%
  • Al: 8.5-9.5%
  • Sn: max 0.1%
  • Zn: max 0.5%
  • Ni: max 1.0%
  • Pb: max 0.05%
  • Fe: 2.5-4.0%
  • Mn: max 1.0%

 

Typical Mechanical Properties (C95210):

  • Tensile Strength: 490 N/mm2
  • Elongation: 20%
  • Typical Hardness: 90 HB
  • 0.2% Yield Strength: 170 N/mm2

 

Applications:

  • Exceptional corrosion resistance
  • High mechanical strength and hardness
  • Toughness and wear resistance
  • Used for heavy duty sleeve bearings and machine tool ways
  • Excellent hot working properties
  • Resistance to oxidation and a low coefficient of friction
  • This group of alloys combines high mechanical strength and hardness with the ability to resist corrosion by a large variety of agents.
  • Corrosion resistance suitable for marine, oil and chemical uses.
  • Excellent hot working properties, resistance to oxidation at elevated temperatures.
  • Good wearing qualities and a low coefficient of friction are some of the features of these alloys.

 

Profiles Available:

  • Flat Bar
  • Square Bar
  • Round Bar / Rod
  • Pipe / Tube
  • Bush / Hollow
  • Sheet / Plate


 Inquiry - NICKEL ALUMINIUM BRONZE