Share:


SealXpert Pipe Repair Kit-Wrap Seal Kit - WS0212

Description :

Features :
  • Repairs leak in 30 minutes
  • Applicable to pipes up to 18' (457 mm) diameter
  • Applicable on any metal or non-metal pipes
  • Repairs T-joint, elbow joint, valve thread, valve body
  • Withstand pressure up to 400 psi (28 kg/cm2)
  • Withstand temperature up to 200 °C (392 °F)
  • Safe for drinking water and resistant to most chemicals
  • Reinforce and strengthen pipe after repair
  • Permanent repair and extend service life of pipes

Applicable Materials :
  • Steel
  • Copper
  • Aluminium
  • Galvanized steel
  • PVC
  • CPVC
  • Stainless steel
  • Polyethylene
  • Polypropylene
  • Cast-iron
  • Concrete
  • FRP/GRE

Chemical Resistance
  • Oil
  • Water (drinking water, wastewater, steam)
  • Solvents (acetone, toluene, MEK, ethyl alcohol)
  • Mild acids (hydrochloric acid, sulfuric acid) and alkalis
  • Chemical (ethylene glycol, xylenes, ammonia)
  • Hydrocarbons
  • Bases
  • Slurries
  • Fuels (petroleum, diesels, gasoline)
  • Gases (LNG, LPG)
  • Organic salts
 
WORKING TIME (FIBERGLASS TAPE):
  • 1 minute at 30 °C (86 °F)

CURING TIME:
  • 30 minutes at 30 °C (86 °F)
  • Heat may be applied to decrease curing time
  • Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.
APPLICATION:
  • Pipe repairs
  • offline repairs
  • sealing joints
  • hazardous material spill control
  • reinforce thinning walls
  • Abrasion protection
  • Structural reinforcement
  • Repairs in hard to reach areas
  • Underwater repairs
OPERATING TEMPERATURE:
  • Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
  • Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)
OPERATING PRESSURE:
  • Recommended for pressure up to 400 psi (28 kg/cm2)
  • (Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application)
TECHNICAL DATA:
Pressure tested : 1/2' (15 mm) steel pipe with 1/8' (3 mm) hole when repaired with Wrap Seal withstands 4000 psi (281 kg/cm2)
    1/2' (15 mm) steel pipe with 1/2' (13 mm) hole when repaired with Wrap Seal withstands 600 psi (42 kg/cm2)
Tensile strength : 3920 psi (276 kg/cm2)
Bond strength : 230 psi (16 kg/cm2)
Tensile elongation : 1.2 % ± 0.7 %
Compression strength : 13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength : 2260 psi (159 kg/cm2)
Cured hardness : 82 Shore D



 Inquiry - SealXpert Pipe Repair Kit-Wrap Seal Kit - WS0212