Share:
Description :
Features :
Applicable Materials :
Chemical Resistance
WORKING TIME (FIBERGLASS TAPE):
CURING TIME:
Features :
- Repairs leak in 30 minutes
- Applicable to pipes up to 18' (457 mm) diameter
- Applicable on any metal or non-metal pipes
- Repairs T-joint, elbow joint, valve thread, valve body
- Withstand pressure up to 400 psi (28 kg/cm2)
- Withstand temperature up to 200 °C (392 °F)
- Safe for drinking water and resistant to most chemicals
- Reinforce and strengthen pipe after repair
- Permanent repair and extend service life of pipes
Applicable Materials :
- Steel
- Copper
- Aluminium
- Galvanized steel
- PVC
- CPVC
- Stainless steel
- Polyethylene
- Polypropylene
- Cast-iron
- Concrete
- FRP/GRE
Chemical Resistance
- Oil
- Water (drinking water, wastewater, steam)
- Solvents (acetone, toluene, MEK, ethyl alcohol)
- Mild acids (hydrochloric acid, sulfuric acid) and alkalis
- Chemical (ethylene glycol, xylenes, ammonia)
- Hydrocarbons
- Bases
- Slurries
- Fuels (petroleum, diesels, gasoline)
- Gases (LNG, LPG)
- Organic salts
WORKING TIME (FIBERGLASS TAPE):
- 1 minute at 30 °C (86 °F)
CURING TIME:
- 30 minutes at 30 °C (86 °F)
- Heat may be applied to decrease curing time
- Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.
- Pipe repairs
- offline repairs
- sealing joints
- hazardous material spill control
- reinforce thinning walls
- Abrasion protection
- Structural reinforcement
- Repairs in hard to reach areas
- Underwater repairs
- Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
- Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)
- Recommended for pressure up to 400 psi (28 kg/cm2)
- (Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application)
| Pressure tested | : | 1/2' (15 mm) steel pipe with 1/8' (3 mm) hole when repaired with Wrap Seal withstands 4000 psi (281 kg/cm2) |
| 1/2' (15 mm) steel pipe with 1/2' (13 mm) hole when repaired with Wrap Seal withstands 600 psi (42 kg/cm2) | ||
| Tensile strength | : | 3920 psi (276 kg/cm2) |
| Bond strength | : | 230 psi (16 kg/cm2) |
| Tensile elongation | : | 1.2 % ± 0.7 % |
| Compression strength | : | 13750 ± 530 psi (967 ± 37 kg/cm2) |
| Yield strength | : | 2260 psi (159 kg/cm2) |
| Cured hardness | : | 82 Shore D |
Inquiry - SealXpert Pipe Repair Kit-Wrap Seal Kit - WS0212
